Rated 4.4 out of 5 by 7
Rated 3 out of 5 good aside from a faulty nut
These stands look great and they are perfect for my Tannoy hits 101 satellite speakers. You have to use the bolt from the tannoy's wall bracket to attach the speaker to the stand but these come with the speaker so that's fine.
There was a slight quality control issue with these stands, one of the nuts that attach the stand to the base plate had no thread so was completely unusable. As these are an unusual size I wasn't able to find one at my local hardware store, trying to get one off eBay. No.luck yet, if I can't find a nut I will have to return the product.
28 March 2015
Rated 5 out of 5 by Rickygrayuk Perfect
Look very nice and the height is adjustable very good price aswell
21 March 2015
Rated 5 out of 5 by Alan56 Quality product
These stands are stable, neat and simple to assemble. A variety of speaker fixings should cover most needs. Only minor issue was threading the speaker wire through the tube - I found it best to thread through the outer tube and then the inner tube and finally assemble them together. Would be difficult (impossible?) for thick speaker wire. Very satisfied with these stands.
01 August 2014
Rated 5 out of 5 by WChan Perfect with Tannoy HTS 101 satellite speakers
I was looking for a set of speaker stands for the Tannoy HTS 101. I popped into the Kingston store and Darren (who was brilliant and extremely knowledgeable) told me about the Omnimout Elo stands. I got home and assembled one, which was really easy to do, and used the L angled mount (supplied in the box) to attach one Tannoy satellite speaker. Unfortunately the screws that came with the Omnimount didn't fit the Tannoy screw hole, but you can use the wall bracket screws that came with the Tannoys and once attached and screwed in, the speakers really look the part. You can chase the cable through the metal tube so that the cable is hidden from view. As noted by another reviewer, you will have trouble getting thick cables through it but once in and attached to the speakers and set up they look really good! You can adjust the height of the stand as the main tube has a smaller tube inside so that you can slide up or down. Once you find your desired height, tighten the screw and away you go.
18 April 2014
Rated 5 out of 5 by bobf Paired with DX1
High quality stand, good quality components, easy to put together. I was concerned about using a double sided tape to support the speakers, not a problem, very secure. There is a limit on the size of cable that can fit the tubes I suggest you check before you purchase.
Easily adjustable with a good range of height.
01 March 2014
Rated 4 out of 5 by Pete558 Good looking and VERY fast delivery too.
The stands are very easy to assemble and instructions very clear.
Using with Q Acoustics speakers...the only mount suitable would be the flat plate...Little difficult to get counter sunk bolts to hold (when the speaker is turned in anti-clockwise direction). Used a spot of super Glue on threads which seems to do the trick
26 February 2014
Rated 4 out of 5 by wappit Very good for the price
If you want a stand that is on show they look good with the black glass plate and the hollow stand to hide the wire, if you want them out of the way the flat plate slides under furniture
A range of brackets supplied for different fitting speakers - bottom and back
A couple of points worth noting the stem is quite thin so you can't fit thick wire down it - ultra micro is OK
Also larger speakers may be too top heavy for these - mine are OK but look better at the lower height
04 February 2014