Lowest Price Guaranteed!
Ts&Cs apply. Must be brand new, in stock & with a similar guarantee
Peerless-AV PRGS-UNV (White)
Projector Mount
In stock
In-Store Clearance Item
Open Box Guide Price
(16 available across all stores)
£89.95
RRP
£139.9500
SAVE
36%
Remember, these are clearance items and therefore condition and accessories/promo items supplied may vary. Please call/email the store to check the price/stock/condition and reserve your clearance bargain. Unfortunately due to costs, and size, TVs can’t be mail ordered from store, or transferred between stores.
ALL CLEARANCE ITEMS ARE FULLY GUARANTEED FOR 12 MONTHS. Please note that extended guarantees are not available on these products.
The Peerless PRGS-UNV is a quality projector mount to match your white projector.
Precision adjustment
Unlike many other designs, the Peerless PRGS-UNV projector mount features precision gear for precise projector adjustment. Two adjustment knobs allow for accurate adjustment of pitch (+15/-20 degrees) and roll (+/-5 degrees). And there's 360 degrees of swivel, (during installation). With Peerless-AV's PRGS Series Projector Mount, just set it and forget it.
Thoughtful design
In addition to the precise adjustment, the PRGS-UNV also features a quick release mechanism for ease of service. The open frame ensures cables can be neatly routed to the projector, and pre-installed security screws provide optional tilt and roll settings lock, preventing accidental adjustments or tampering.
With sturdy build quality and a weight limit of 22kg, the PRGS-UNV is ideal for all but the heaviest of projector units.
Precision adjustment
Unlike many other designs, the Peerless PRGS-UNV projector mount features precision gear for precise projector adjustment. Two adjustment knobs allow for accurate adjustment of pitch (+15/-20 degrees) and roll (+/-5 degrees). And there's 360 degrees of swivel, (during installation). With Peerless-AV's PRGS Series Projector Mount, just set it and forget it.
Thoughtful design
In addition to the precise adjustment, the PRGS-UNV also features a quick release mechanism for ease of service. The open frame ensures cables can be neatly routed to the projector, and pre-installed security screws provide optional tilt and roll settings lock, preventing accidental adjustments or tampering.
With sturdy build quality and a weight limit of 22kg, the PRGS-UNV is ideal for all but the heaviest of projector units.
The Peerless PRGS-UNV is a quality projector mount to match your white projector.
Precision adjustment
Unlike many other designs, the Peerless PRGS-UNV projector mount features precision gear for precise projector adjustment. Two adjustment knobs allow for accurate adjustment of pitch (+15/-20 degrees) and roll (+/-5 degrees). And there's 360 degrees of swivel, (during installation). With Peerless-AV's PRGS Series Projector Mount, just set it and forget it.
Thoughtful design
In addition to the precise adjustment, the PRGS-UNV also features a quick release mechanism for ease of service. The open frame ensures cables can be neatly routed to the projector, and pre-installed security screws provide optional tilt and roll settings lock, preventing accidental adjustments or tampering.
With sturdy build quality and a weight limit of 22kg, the PRGS-UNV is ideal for all but the heaviest of projector units.
Precision adjustment
Unlike many other designs, the Peerless PRGS-UNV projector mount features precision gear for precise projector adjustment. Two adjustment knobs allow for accurate adjustment of pitch (+15/-20 degrees) and roll (+/-5 degrees). And there's 360 degrees of swivel, (during installation). With Peerless-AV's PRGS Series Projector Mount, just set it and forget it.
Thoughtful design
In addition to the precise adjustment, the PRGS-UNV also features a quick release mechanism for ease of service. The open frame ensures cables can be neatly routed to the projector, and pre-installed security screws provide optional tilt and roll settings lock, preventing accidental adjustments or tampering.
With sturdy build quality and a weight limit of 22kg, the PRGS-UNV is ideal for all but the heaviest of projector units.
Brand
Peerless
Colour
White
Dimensions WxHxD (mm)
122-448 x 92-118 x 122-448
Fixed
No
Tilting
Yes
Cantilever
No
Projector Mount
Yes
Max Weight
22
Tilt Adjustment
10
Rated 5 out of
5
by
DrNick from
Great mount for a projector taken up and down
This projector mount has been designed to make life easy. The part which fixes to the ceiling is compact and the projector slides into place. A securing screw keeps it in place and only minor adjustments are needed to re-centre the picture. The adjustments themselves are very easy to get everything set correctly (much unlike a previous mount I had which worked on a ball-joint!).
The only negative I would give are the legs which connect to the projector themselves. They seemed over engineered for what they did, but perhaps this solves issues or gives flexibility which I didn't have or need. Oh, and it is quite expensive (but it does the job!)
Date published: 2020-03-22
Rated 4 out of
5
by
Faraday from
Solid, strong, a few flaws
Strongest most sturdy ceiling bracket I have had (been through a few over the years). There are a couple of minor issues, one being that the surface that goes to the ceiling has two small press studs that are 1mm proud of the surface, so it won't sit completely flush to a hard surface, the second is that there is a bit of play in the fine adjustments - so once you are set it might take a few goes to sit just right. Overall though, the best ceiling brackets I've used.
Date published: 2020-02-15
Rated 5 out of
5
by
Nik22 from
Brilliant mount - east to adjust picture
Every easy to alight the projected image to tour mount with the adjustable arms.
Date published: 2020-01-19
Rated 5 out of
5
by
Anonymous from
Extremely well built and solid
Bought this to mount my JVC X5000 which weighs 15kg. The mount was simple to attach to the unit and easier still to screw in to the ceiling with all the necessary screws and bolts supplied. Build quality is fantastic, totally worth the money. The adjustment knobs are excellent to adjust the projector.
Date published: 2019-03-20
Rated 5 out of
5
by
jazzman22 from
It does exactly what it says it does
This projector mount was recommended by a friend, but could help thinking it was expensive overkill, boy was I ever wrong!
What a superb piece of kit that allows you very fine control in every direction including roll.
Installed it looks very professional.
Date published: 2018-09-02
Rated 5 out of
5
by
Anonymous from
Once figured out its great
This is a good mount, has lots of adjustment and enough fixings to suit probably every projector wanted. I fixed to a plasterboard ceiling using 4 Toggler Snaptoggle fixings and its rock solid. Great utilitarian addition to my cinema room once I'd figured out the basic adjustment mechanisms. Easily would give enough latitude to make up for a projector not perfectly aligned to screen not that I needed it.
Date published: 2018-08-23
Rated 5 out of
5
by
GiveItSomeWellySB from
The ultimate Herculean mount for a JVC projector!
I bought this a month ago for my JVC DLA-X70R projector. Thankfully after my DIY fitting, it is still sitting pride of place on the ceiling of my cinema room!
I experienced very helpful customer service from the Cheltenham store, making sure that it could withstand the weight of the projector before purchasing. Thanks for a brilliant product (which arrived next day, I may add), it's a worthy addition to any home cinema! The mount has fully adjustable yaw, roll and pitch. Additionally this mount could be used on a plethora of other projector brands.
Date published: 2018-07-08
Rated 5 out of
5
by
Shane17 from
Superb!!!
So easy to fit....takes mixtures to fit and install
Date published: 2016-03-27
In-Store Clearance Item
Open Box Guide Price
(16 available across all stores)
£89.95
RRP
£139.9500
SAVE
36%
Remember, these are clearance items and therefore condition and accessories/promo items supplied may vary. Please call/email the store to check the price/stock/condition and reserve your clearance bargain. Unfortunately due to costs, and size, TVs can’t be mail ordered from store, or transferred between stores.
ALL CLEARANCE ITEMS ARE FULLY GUARANTEED FOR 12 MONTHS. Please note that extended guarantees are not available on these products.