Pixel Plus Speaker Stand Speaker Stands Per Pair

Pixel Plus Speaker Stand

Speaker Stands Per Pair

In stock

In-Store Clearance Item

Open Box Guide Price
(7 available across all stores)

£99.95 RRP £119.9500

SAVE

17%

 

Remember, these are clearance items and therefore condition and accessories/promo items supplied may vary. Please call/email the store to check the price/stock/condition and reserve your clearance bargain. Unfortunately due to costs, and size, TVs can’t be mail ordered from store, or transferred between stores.
ALL CLEARANCE ITEMS ARE FULLY GUARANTEED FOR 12 MONTHS. Please note that extended guarantees are not available on these products.

Richer Sounds exclusive model.

If you've got quality stand-mount speakers then, to bring out their best, sturdy, well-isolated pair of stands are essential. The Pixel Plus are just such stands.


Aerofoil-shaped columns

Constructed from extruded aluminium, the centre columns provide the ideal support for these stands. A large diameter column not only adds to the stands' rigidity but also allows mass damping via dry sand. A sweeping, aerofoil profile gives the Pixel Plus a stylish stance, too. Helping to keep your speaker cables tidy, internal cable management at the rear of the columns provides a hidden cable run.

Quality construction
The quality construction continues with the end plates. The base plates use extra-thick steel for added stability, while the top plate is supplied with adjustable spikes for the ultimate in speaker isolation. Should you prefer not to mark your speakers, rubber feet can be used instead. Both plates are connected via four bolts rather than the more usual one or two; helping to improve the structural integrity still further.

For better sound through tighter control, take a stand with the Pixel Plus.
Richer Sounds exclusive model.

If you've got quality stand-mount speakers then, to bring out their best, sturdy, well-isolated pair of stands are essential. The Pixel Plus are just such stands.


Aerofoil-shaped columns

Constructed from extruded aluminium, the centre columns provide the ideal support for these stands. A large diameter column not only adds to the stands' rigidity but also allows mass damping via dry sand. A sweeping, aerofoil profile gives the Pixel Plus a stylish stance, too. Helping to keep your speaker cables tidy, internal cable management at the rear of the columns provides a hidden cable run.

Quality construction
The quality construction continues with the end plates. The base plates use extra-thick steel for added stability, while the top plate is supplied with adjustable spikes for the ultimate in speaker isolation. Should you prefer not to mark your speakers, rubber feet can be used instead. Both plates are connected via four bolts rather than the more usual one or two; helping to improve the structural integrity still further.

For better sound through tighter control, take a stand with the Pixel Plus.
Brand Pixel
Top Plate Size (mm) (WxD) 152 x 223
Base Plate Size (mm) (WxD) 235 x 320
Floorstand Yes
Spikes Base and Top
Cable Management Yes
Height (mm) 625
Rated 5 out of 5 by from OutSTANDing Ordered two sets of these for front and surround duties supporting my Kef R3s and Atmos modules. They definitely look and feel the part and even at the recent price increase are well worth as an alternative to Kef’s own stands. Noticed a clear improvement throughout the frequency range once I had the R3s planted on them with no runaway bass (R3s have Anthem Arc room correction keeping them under control). Some points to consider if you’re thinking of buying a pair: Smaller thread basic M6 spikes are supplied instead of the unusual M8, so if you are looking to reuse your own isolators you’ll need a M8/M6 thread reducer. Yep, the silver spikes locking nut and silver spikes look ugly and incongruous. I don’t use them and will replace with my own once I get the isolators properly fitting. You must use a decent stand filler and I got vest results by filling with 89% Atacama atabytes. Dry sand will work and you can reuse the plastic bag wrapping the columns are supplied in to insert into the columns and fill. Drop your cables in from the top and pull out from the underside before placing the speakers as fishing them out from the bottom up can be fiddly. Richer Sounds Telesales guys really helpful in resolving an issue I had with one of the columns which had been scratched when packed by their supplier. But the finish on these is really cool (darker than the photo). Recommended.
Date published: 2021-02-04
Rated 5 out of 5 by from Design and Quality Belies Price My original choice of stands was out of stock. Am I glad I took these as a substitute. Very good quality spikes, locknuts and bolts. Precisely machined plates and extrusions allow no movement at mating surfaces. Hence devoid of the sway apparent in my other, well thought of, set of three-legged stands. Precise imaging, deeper sound stage and firmer bass. 2/3 filled with kiln dried sand, my much loved Diamond 220s sound even better. As remarked elsewhere, they bear a strong resemblance to a very expensive and prestigious speaker manufacturer's stands. Bought ex-display from RS Edinburgh. Carefully packed, all components present and correct. Wouldn't hesitate to buy ex-display stock from RS again.
Date published: 2020-12-18
Rated 4 out of 5 by from Solid, easy to assemble This stand was pretty easy to put together and has done a great job improving the listening experience. I haven't filled them with sand and the sound is fine, but I mostly listen to classical music so probably don't get too much of the deep bass vibration. I have them on a hard wood floor which means I had to get separate 'shoes' to avoid damaging the floor; might have been good to offer these as an option at point of sale. Also, adjusting the feet needs patience to get them firmly on the ground.
Date published: 2020-12-11
Rated 5 out of 5 by from great value loaded with kiln dried sand £5 a bag,these stands are unbeatable value for money , and are perfect for book shelf speakers,a must for anyone who wants the best out of their speakers.
Date published: 2020-11-02
Rated 4 out of 5 by from Decent with good balance Good speaker stands. Look nice and a runner for hiding speakers cables. You can adjust the spikes to level up with your floor
Date published: 2020-10-21
Rated 4 out of 5 by from Very Good and Sturdy I have wanted stands for ages and I am so glad I purchased these Pixel stands.
Date published: 2020-10-09
Rated 5 out of 5 by from Pixel plus speaker stands Stands are very stylish, well built they look fantastic. Very happy.
Date published: 2020-09-28
Rated 5 out of 5 by from Very sturdy The speakers are very solid therefore there is no vibration from the speakers when played full blast
Date published: 2020-08-29
  • y_2021, m_4, d_11, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_en_GB, sid_PIXEL-PLUS-STAND, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_richersounds
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 161.43ms
  • REVIEWS, PRODUCT

In-Store Clearance Item

Open Box Guide Price
(7 available across all stores)

£99.95 RRP £119.9500

SAVE

17%

 

Remember, these are clearance items and therefore condition and accessories/promo items supplied may vary. Please call/email the store to check the price/stock/condition and reserve your clearance bargain. Unfortunately due to costs, and size, TVs can’t be mail ordered from store, or transferred between stores.
ALL CLEARANCE ITEMS ARE FULLY GUARANTEED FOR 12 MONTHS. Please note that extended guarantees are not available on these products.