”Same old look but with a spacious new sound.” ’What Hi-Fi?’ - 5 Star review.
The Denon difference Founded in 1910, Denon has over a century of audio experience. This experience becomes clear, as soon as you listen to the Denon AVR-X2800H. With a high performance, discrete 7-channel amplifier at its heart, this Denon AVR has a perfect balance of power and control. With 95 watts per channel, the full force of home cinema movies and gaming is easily realised.
Experience the immersion of Dolby Atmos and DTS:X Dolby Atmos and DTS:X use ceiling or up-firing speakers for three-dimensional and fully immersive sound. Whether it’s rain falling in a tropical jungle or the intense sound of overhead gunfire, Dolby Atmos and DTS:X put you in the centre of the action.
Extra height, without the speakers As impressive as Dolby Atmos and DTS:X sound, it’s not always possible to accommodate the extra speakers. Dolby Atmos Height Virtualization and DTS Virtual:X Height Virtualisation technology go some way to help. Play any Dolby format and enjoy a more immersive sound with virtual height enhancement – using your existing speakers. DTS Virtual:X also creates a more enveloping sound from any DTS codec. Compatible with 2.1, 5.1 or 7.1 speaker configurations, DTS Virtual:X gives the impression of height and immersive sound.
Enhanced 8K, HDCP 2.3 HDMI compatibility Upgrading on previous AVRX2000-series receivers, the X2800 now features three, 8K compatible HDMI sockets, compared to one. Both outputs are 8K compatible, too. They support 8K pass-through, 4K/120Hz and 8K upscaling of 4K content, too. The X2800 also supports the latest copy protection standard, HDCP 2.3.
Wide-ranging HDR support The AVR-X2800H also supports a wide range of High Dynamic Range video formats. These include Dolby Vision, HDR10 and HLG. It also supports HDR10+, which enhances picture realism by sending dynamic Meta data to your TV, as well as Dynamic HDR. In short, whatever the format used by the film, game or stream, the Denon supports it.
Made for gamers in mind The enhanced HDMI interface makes this Denon AV receiver the perfect choice for gaming. There’s support for 4K/120Hz and VRR (Variable Refresh Rate), giving you the best resolution and clarity. Quick Frame Transport (QFT) and Auto Low Latency Mode (ALLM) help eliminate lag and frame tearing, giving you a smoother, more responsive gaming experience.
HEOS built-in - for the finest multi-room audio HEOS multi-room music systems connect together by dual-band Wi-Fi, making them easy to set up with your existing home network. Up to 32 HEOS units can be set up at one time, ensuring even the largest of homes are covered for multi-room music. With HEOS already built-in, the AVC-X2800H is ready to go as a single 'zone' without any further adaptors.
Control it all with the HEOS app Once you've set up your HEOS speaker system, you can stream music effortlessly via the dedicated HEOS app. Available for Apple iOS and Android, the app not only lets you stream your stored music but also Internet radio services and popular streaming services such as Spotify, Tidal, Napster and Deezer.
Use with your choice of voice assistant Compatible with Siri, Alexa and Google Assistant, the AVR-X2800H works with your voice assistant of choice. For Alexa or Google Assistant control, simply download the HEOS app. Pair your Echo device if you’re using Alexa and you’re good to go – adjust the volume, skip to the next track and switch inputs simply by asking Alexa or Google. For control via Siri, simply link the amp via Apple AirPlay 2 and enjoy voice interaction and AirPlay 2 multi-room support.
Audyssey MultEQ XT for optimised set-up Featuring Audyssey's MultEQ XT technology, the AVR-X2800H adapts itself to your room's acoustics. Use the supplied Audyssey measuring microphone and the system tunes the AV receiver to provide the smoothest, most optimal overall listening experience for your room. If you want to take this even further, purchase the MultEQ Editor App (at additional cost) and you've access to advanced user settings.
Connect it all – from turntable to TV With six HDMI inputs (three 8K, three 4K), the Denon has you covered for connecting all your video and gaming devices. Optical digital inputs are ideal for connecting older devices or upgrading the sound from a compatible CD/Network player. Four analogue inputs are perfect for Hi-Fi components, plus there’s a further, dedicated MM phono input for plugging in a turntable.
Quick Selects for the perfect sound – instantly With such user flexibility, getting the perfect sound can be a complex business. For this reason, Denon has fitted the AVR-X2800H with four Quick Select audio presets. Take your time in setting the ideal sound balance for your TV, Blu-ray, games console and music source and recall them at the touch of a button for the ideal sound, instantly.
Get sound your big-screen TV deserves, with the Denon AVR-X2800H.
”Whafedale's refined, entertaining and affordable floorstanders take the top spot for yet another year.” ’What Hi-Fi?’ 2024 award-winner.
Strong bass with unobtrusive style from this compact floorstander Ideal for medium-sized rooms, the Wharfedale Diamond 12.3 offers the deep, powerful sound you'd expect from floorstanding speakers while keeping the overall dimensions relatively compact. Using a second, dedicated bass woofer, the Diamond 12.3 punches hard. Not only does this second woofer unit increase the depth and volume of bass, it also helps to 'fill out' the sound at lower volumes, making this an ideal speaker for use at all volume levels.
Flexible speaker The size of these speakers makes them equally at home as stereo or front speakers as part of a Diamond 12-Series home cinema system. They're also easy to place, working well close to or away from the rear wall.
Ground-up redesign Although this is a speaker with all the Diamond traits in place, the design is completely new. Making use of powerful computer modelling, the Diamond 12.3 is engineered to perform. Totally new drive units use a motor system more typically found in professional speakers – giving excellent power handling and low distortion. The new Klarity cone material uses a hybrid construction to give lightning-fast response in the bass and mid-range, while the woven textile tweeter delivers the perfect balance between detail and refinement.
Choice of finishes Available in black, light oak or walnut finishes, the 12.3 suits a wide range of decors. The cabinet itself is engineered from differing thicknesses of MDF to control resonance. Combined with the strategic bracing, this makes it solid and free from the distorting ‘boxy’ sound. In short, you get to hear the soul of your music, distortion-free.
Delivering a rich, powerful sound, the Wharfedale Diamond 12.3 is a sparkling performer.
Stylish and room-friendly, but with ample bass to add drama to any soundtrack, the REL HT1003 MKII is a masterful subwoofer.
Twice as loud as before The original HT/1003 was certainly no slouch in the impact department, but the new REL HT/1003 MKII now delivers sound that’s up to twice as loud. Featuring a new CarbonGlas 10 inch woofer and a much-improved 300 watt amplifier, the MKII version optimises its hardware for greater slam with less distortion. With its appetite for powerful dynamics, this ‘baby’ REL brings a heightened realism to everything from action movies to shoot ‘em up gaming.
Power with control Although the HT/1003 MKII goes deep and loud it doesn’t do this at the expense of sound quality. The sub uses an array of PerfectFilters and a rigid cabinet to produce a low distortion, highly realistic bass. This means that a bass guitar, for example, actually sound like the real thing, rather than just a one-note bass sound. REL’s PerfectFilters include an analogue subsonic filter that minimises the effect of soundtrack infra-noise. This helps push the distortion threshold higher, maximising the bass unit’s performance.
Optional HT-Air* for wireless connectivity If you’d like to cut out the cable, then check out REL’s industry-leading HT-Air wireless system. Unlike other wireless subs, the HT-Air uses a unique, zero compression, system developed exclusively by REL. Using a state-of-the-art chipset, the HT-Air wireless transmitter offers flawless signal quality with zero compression. Delivering a latency (lag) figure of just 16-20 milliseconds, it’s hugely superior to the more common Bluetooth method of wireless connection. Put simply, the bass keeps up and stays in time with the action.
*Available at additional cost.
Surprisingly stylish Rarely known for their good looks, subwoofers are often the least attractive and most difficult to accommodate home cinema components. The REL HT/1003 MKII seeks to change that. Rounded edges and elegant feet reduce visual bulk, making this subwoofer harmonise with your interior better than most. The black textured finish has an aluminium look which contrasts with the sleek gloss top plate. Considering its 10 inch bass driver, the sub is relatively compact, too.
Adjust to suit your room A selection of controls, handily labelled to be read from above, make it easy to fine-tune the REL to your room. The level control establishes the volume while the Crossover control gives seamless integration with your existing speakers. If your room dictates that the sub is positioned behind you, then simply flick the phase switch and the sub corrects the sound to match your other speakers. If it’s tucked out of sight, then use the Auto power function for hands-free power-up.
Hear the bottom end that you’ve been missing out on, with the REL HT/1003 MKII.
”Wharfedale's affordable standmounts deliver fantastic audio for a modest sum.” ’What Hi-Fi?’ 2024 award-winner.
The legend continues It was way back in 1982 when the Wharfedale Diamond first redefined expectations of small speakers. The original model proved that a small speaker didn't necessarily need to sound 'small', that a budget speaker could sound full-bodied without being intrusive. The latest Diamond 12.1 is true to the original’s ethos and has already proved to be a big hit.
Flexible speaker The beauty with compact Diamond speakers is their sheer versatility - and the 12.1 is no different. The compact size and high sensitivity makes them the ideal companion for mini systems or hi-fi separates systems alike. They're also easy to place, working well close to or away from the rear wall. If you're looking for quality home cinema speakers, they also work exceptionally well as satellite speakers - there's even a centre speaker to match.
Ground-up redesign Although this is a compact speaker with all the Diamond traits in place, the design is completely new. Making use of powerful computer modelling, the Diamond 12.1 is engineered to perform. Totally new drive units use a motor system more typically used in professional speakers – giving excellent power handling and low distortion. The new Klarity cone material uses a hybrid construction to give lightning-fast response in the bass and mid-range, while the woven textile tweeter delivers the perfect balance between detail and refinement.
Choice of finishes Available in black, light oak or walnut finishes, the 12.1 suits a wide range of decors. The cabinet itself is engineered from differing thicknesses of MDF to control resonance. Combined with the strategic bracing, this makes it solid and free from the distorting ‘boxy’ sound that can afflict smaller speakers. In short, you get to hear the soul of your music, distortion-free.
With a fresh new design, the Wharfedale Diamond 12.1 is still the small speaker to beat.
Enjoy crystal-clear vocals, with the Wharfedale Diamond 12.C.
The perfect match for a Diamond AV speaker system With matching aesthetics and drive unit design, the Wharfedale Diamond 12.C centre makes the ideal centre speaker to match up with other Diamond 12 speakers in a surround sound set up. Use either Diamond 12.1s or 12.2s as satellite speakers all around or match with larger Diamond 12.3 or 12.4 floorstanders at the front, and you have a perfectly matched speaker system. Alternatively, the crisp and precise vocals make the Diamond 12.C ideal as a centre speaker upgrade from more basic speaker systems.
Immersive sound Featuring twin cones, the 12.C centre speaker delivers a wide, immersive sound. Effortlessly filling the space between the front speakers, the 12.C brings cinematic movies to life.
Ground-up redesign Although this is a classic Diamond speaker, the design is completely new. Making use of powerful computer modelling, the Diamond 12.C is engineered to perform. Totally new drive units use a motor system more typically used in professional speakers – giving excellent power handling and low distortion. The new Klarity cone material uses a hybrid construction to give lightning-fast response in the bass and mid-range, while the woven textile tweeter delivers the perfect balance between detail and refinement.
Choice of finishes Available in black, light oak or walnut finishes, the 12.C suits a wide range of decors. The cabinet itself is engineered from differing thicknesses of MDF to control resonance. Combined with the strategic bracing, this makes it solid and free from distorting, ‘boxy’ sound, making it ideal for crisp and clear vocals.
Get to the heart of the dialogue, with the Wharfedale Diamond 12.C.
