Pixel Plus Speaker Stand is rated
out of
5 by
36.
Pixel Plus Speaker Stand
Speaker Stands Per Pair
£49
Disabled assistance
All products that are available to purchase on the Richer Sounds website can be delivered free to blind, partially sighted or those with a disability. Find out more
Please contact web after sales for more info.
For delivery of in-store only deals, please contact your local store for more details.
Ts&Cs apply - see our delivery page.
For delivery of in-store only deals, please contact your local store for more details.
Ts&Cs apply - see our delivery page.
If you've got quality stand-mount speakers then, to bring out their best, sturdy, well-isolated pair of stands are essential. The Pixel Plus are just such stands.
Aerofoil-shaped columns
Constructed from extruded aluminium, the centre columns provide the ideal support for these stands. A large diameter column not only adds to the stands' rigidity but also allows mass damping via dry sand. A sweeping, aerofoil profile gives the Pixel Plus a stylish stance, too. Helping to keep your speaker cables tidy, internal cable management at the rear of the columns provides a hidden cable run.
Quality construction
The quality construction continues with the end plates. The base plates use extra-thick steel for added stability, while the top plate is supplied with adjustable spikes for the ultimate in speaker isolation. Should you prefer not to mark your speakers, rubber feet can be used instead. Both plates are connected via four bolts rather than the more usual one or two; helping to improve the structural integrity still further.
For better sound through tighter control, take a stand with the Pixel Plus.
Aerofoil-shaped columns
Constructed from extruded aluminium, the centre columns provide the ideal support for these stands. A large diameter column not only adds to the stands' rigidity but also allows mass damping via dry sand. A sweeping, aerofoil profile gives the Pixel Plus a stylish stance, too. Helping to keep your speaker cables tidy, internal cable management at the rear of the columns provides a hidden cable run.
Quality construction
The quality construction continues with the end plates. The base plates use extra-thick steel for added stability, while the top plate is supplied with adjustable spikes for the ultimate in speaker isolation. Should you prefer not to mark your speakers, rubber feet can be used instead. Both plates are connected via four bolts rather than the more usual one or two; helping to improve the structural integrity still further.
For better sound through tighter control, take a stand with the Pixel Plus.
Overview
Stand / Mount Type
Floor Stand
General
Spikes
Base and Top
Cable Management
Yes
Manufacturer's Warranty
1 year
Dimensions
Base Plate Size (mm)
235 x 320
Top Plate Size (mm) (WxD)
152 x 223
Height (mm)
625
Rated 5 out of
5
by
Marc56 from
Excellent for the price
Needed some new speaker stand and these were recommended by blue at Plymouth store I needed something sturdy and these are fine and came with quick delivery
Date published: 2021-11-19
Rated 5 out of
5
by
Joe33 from
Pixel Plus Speaker Stands
Great speaker stands for the price. Inbuilt cable management, fillable and adjustable spikes. Happy with my purchase. Thank you RicherSounds Leicester!
Date published: 2021-08-19
Rated 5 out of
5
by
Seryozha from
OutSTANDing
Ordered two sets of these for front and surround duties supporting my Kef R3s and Atmos modules. They definitely look and feel the part and even at the recent price increase are well worth as an alternative to Kef’s own stands.
Noticed a clear improvement throughout the frequency range once I had the R3s planted on them with no runaway bass (R3s have Anthem Arc room correction keeping them under control).
Some points to consider if you’re thinking of buying a pair:
Smaller thread basic M6 spikes are supplied instead of the unusual M8, so if you are looking to reuse your own isolators you’ll need a M8/M6 thread reducer.
Yep, the silver spikes locking nut and silver spikes look ugly and incongruous. I don’t use them and will replace with my own once I get the isolators properly fitting.
You must use a decent stand filler and I got vest results by filling with 89% Atacama atabytes. Dry sand will work and you can reuse the plastic bag wrapping the columns are supplied in to insert into the columns and fill.
Drop your cables in from the top and pull out from the underside before placing the speakers as fishing them out from the bottom up can be fiddly.
Richer Sounds Telesales guys really helpful in resolving an issue I had with one of the columns which had been scratched when packed by their supplier. But the finish on these is really cool (darker than the photo).
Recommended.
Date published: 2021-02-04
Rated 5 out of
5
by
musensohn from
Design and Quality Belies Price
My original choice of stands was out of stock. Am I glad I took these as a substitute.
Very good quality spikes, locknuts and bolts. Precisely machined plates and extrusions allow no movement at mating surfaces. Hence devoid of the sway apparent in my other, well thought of, set of three-legged stands.
Precise imaging, deeper sound stage and firmer bass.
2/3 filled with kiln dried sand, my much loved Diamond 220s sound even better.
As remarked elsewhere, they bear a strong resemblance to a very expensive and prestigious speaker manufacturer's stands.
Bought ex-display from RS Edinburgh. Carefully packed, all components present and correct. Wouldn't hesitate to buy ex-display stock from RS again.
Date published: 2020-12-18
Rated 4 out of
5
by
Bingly from
Solid, easy to assemble
This stand was pretty easy to put together and has done a great job improving the listening experience. I haven't filled them with sand and the sound is fine, but I mostly listen to classical music so probably don't get too much of the deep bass vibration.
I have them on a hard wood floor which means I had to get separate 'shoes' to avoid damaging the floor; might have been good to offer these as an option at point of sale. Also, adjusting the feet needs patience to get them firmly on the ground.
Date published: 2020-12-11
Rated 5 out of
5
by
Anonymous from
great value
loaded with kiln dried sand £5 a bag,these stands are unbeatable value for money , and are perfect for book shelf speakers,a must for anyone who wants the best out of their speakers.
Date published: 2020-11-02
Rated 4 out of
5
by
Livemo1 from
Decent with good balance
Good speaker stands. Look nice and a runner for hiding speakers cables. You can adjust the spikes to level up with your floor
Date published: 2020-10-21
Rated 4 out of
5
by
Lotus2760 from
Very Good and Sturdy
I have wanted stands for ages and I am so glad I purchased these Pixel stands.
Date published: 2020-10-09
Representative example
- Representative 21.9% APR (variable)
- Purchase rate 21.9% p.a. (variable)
- Assumed credit limit £1,200
Pay in 3 interest-free payments so you can spread the cost. No fees when you pay on time.
- Add item(s) to your cart (up to £1500)
- Go to checkout and choose Klarna
- Enter your debit or credit card information.
- To check your eligibility, Klarna will perform a soft search with a credit reference agency. This will not affect your credit score.
- Spread the cost in 3 interest-free payments. The first payment is made at point of purchase, with the remaining 2 payments scheduled automatically every 30 days. No fees when you pay on time.
You must be 18+ to use this credit offer. Credit subject to status. T&Cs apply. Klarna uses soft searches with credit reference agencies. These do not affect your credit rating. Missed payments can affect your ability to use Klarna. Pay in 3 installments complete terms.